27kv 600A Single Phase Disconnecting Standard Type Porcelain Isolate Switch

• Type: High-voltage
• Structure: Single-column Disconnector
• Installation: Outdoor High-voltage
• Operation: Manual
• Grounding Mode: Not Grounding
• Movement Mode: Vertical Rotary Type
• Model NO.: GW9-27/600
• Number of Poles: One
• Grounding: Un Grounded
• Series: Single-Stage
• Run: Turn the Horizontal
• Switching Mode: Gw9-27/600
• Common Model: Gw9-27/600
• Structure of Operating: Manual
• Certification: ISO, IS9001, IEC
• Transport Package: Wooden Carten
• Specification: GW9-27/600
• Trademark: Jecsany
• Origin: China
• HS Code: 8535309000
• Production Capacity: 50000PCS/Year

Product Description

Circuit Breakers & Switch /Isolating Switch  GW9-27/600

Outdoor disconnect switch used in 15KV, 27KV and 38KV power distribution system, with current from 200A to 630A, and it used as switching on and switch off at the voltage without load.

Technical Performance

 

1. Rated Voltage:27kV

2. Rated Frequency:50Hz / 60Hz

3. Rated Current:600A

4. Power Frequency Withstand Voltage:50kV

5. Lightning Impulse Withstand Voltage:125kV

6. Rated Short-time Withstand Current:25kA

7. Creepage Distance:550mm
 

Isolating Switch 

An electrical device for the reliable disconnection of certain sections of a high-voltage electrical network when there is no current in them. The use of isolating switches (either alone or in combination with high-speed short-circuiting devices) makes it possible to simplify the arrangement of switching points and transformer substations and to eliminate expensive high-voltage circuit breakers.

 

In the case of damage to certain sections of a network, the circuit breakers operate first, and then the isolating switches automatically disconnect the damaged section, after which the circuit breakers close again and restore electric power to the rest of the consumers on the network. Isolating switches are also used to disconnect and reconnect unloaded transformers and sections of power lines during operation. An isolate switch must provide a reliable connection in case of a random occurrence of a short circuit in the network. An important characteristic of an isolating switch is a short operate time, particularly the disconnect time, which must not exceed 0.1 sec.